Used Structural Rack · Pre-Sale
A complete structural rack system is coming out of a Memphis, TN distribution center, holding two 48" wide, 40" deep loads per level with pallet supports at every position. Sold by the project: delivered to your site, or installed by our in-house crews with the engineering and permit handled.
Decommission Take-Off
The 33' system is the main event. The 27' structural system (about 400 positions with wire deck) and 27' teardrop system (about 120 positions) are available too.
| 33' Structural System | Qty |
|---|---|
| 36" x 33' structural uprights | 616 |
| 108" x 4" roll-form beams, structural connection | 5,600 |
| 36" drop-in pallet supports | 11,200 |
| 27' Teardrop System | Qty |
|---|---|
| 44" x 27' teardrop uprights | 18 |
| 108" x 4 1/2" teardrop beams | 120 |
| 44" drop-in pallet supports | 240 |
| 27' Structural System | Qty |
|---|---|
| 48" x 27' structural uprights, 4" face | 102 |
| 108" x 5 1/2" roll-form beams, structural connection | 408 |
| 48" x 52" drop-in wire deck | 408 |
| Accessories | Qty |
|---|---|
| Double end-of-row guards | 96 |
Quantities from the decommission take-off and subject to final count at teardown. Positions are as currently configured. The 4,000 lb per level rating is a conservative minimum; final capacities are confirmed on your layout and permit drawings.
How It Fits
Beam levels move to fit your loads: tight levels low for hand-pick, tall levels up top for full pallets.
Running 48x40 stringer pallets? Forks only enter the 40" end, so they belong 48" deep on 42" frames, not sideways on this system. Tell us your pallet and we'll confirm the fit.
A back-to-back row on 36" frames runs about a foot narrower than one on standard 42" frames. A 40" deep load also needs less aisle to turn into than a 48" one. Narrower rows and tighter aisles mean more rows, and more positions, in the same building.
The System In Place
Structural uprights with bolted beam connections and anchored base plates, photographed in the building before teardown. What you see is what ships.
Sold By The Project
Send us your building drawing or dimensions. We lay out the rows and tell you how many positions fit.
We size the order to that layout, load it and ship it to your site.
Our in-house crews install it. We handle engineering and permits, with 98% first-pass permit approval.
Pre-Sale
Tell us about your building and your pallets. A salesperson will call you, get your drawing, and come back with a layout, a position count and an installed price.
No obligation. Pre-sale buyers get first pick before the system goes into general inventory.
Received
A salesperson will call you about pricing and timing. If you need us sooner, call (901) 761-6912.
